As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Audio-Technica ATH-E50 Review: Single Balanced Armature Studio IEM

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Audio-Technica ATH-E50 is a professional in-ear studio monitor, not a consumer earbud. Each side uses a single balanced armature driver, which Audio-Technica says gives an accurate full-range response, and the housings are shaped for maximum isolation. That makes it a reference for producers and musicians on the road who need the same sound in any room or on stage. The flexible memory cable loops over the ears and is detachable, 1.6 m (5.2 ft) long. In the box are a carrying case, a 6.3 mm (1/4 in) adapter and silicone tips in XS, S, M and L. There is no mic, no Bluetooth and no active noise cancelling. The listing gives no impedance, sensitivity or cable connector type. This ATH-E50 review draws on Audio-Technica's listing, not hands-on use.

What stands out

  • ATH-E50: single balanced armature driver
  • ATH-E50: high-isolation housings
  • ATH-E50: detachable 1.6 m cable
  • ATH-E50: XS/S/M/L tips and 6.3 mm adapter

Who it fits

Good fit for

Producers, engineers and stage musicians who want a consistent reference IEM with a replaceable cable and strong passive isolation.

Who should skip it

Casual listeners who want a bass-heavy sound, a mic for calls, wireless use, or active noise cancelling.

Verdict: The ATH-E50 is built for accuracy and isolation, with a pro-style detachable cable. Check the impedance and connector on Audio-Technica's spec sheet if you plan to use it with stage or studio gear.

Audio-Technica ATH-E50 specs explained

Single balanced armature

One BA driver per ATH-E50 side, aimed at an accurate, even response.

Isolation housings

The ATH-E50 shape blocks outside sound passively; there is no ANC.

Over-ear memory cable

The ATH-E50 cable holds its loop around the ear for a secure fit on stage.

Detachable 1.6 m cable

A replaceable ATH-E50 lead; the connector type is not named.

6.3 mm adapter

The ATH-E50 plugs into studio interfaces and mixers with a 1/4 in jack.

XS/S/M/L silicone tips

Four ATH-E50 tip sizes to get a proper seal.

ATH-E50 build

The black ATH-E50 housings are compact and the listed weight is 0.35 oz. The cable is worn over the ear, as on most stage monitors, and detaches from the earpieces so a damaged lead can be replaced. A carrying case comes in the box. The listing does not say which connector the detachable cable uses.

Monitoring with the Audio-Technica ATH-E50

On stage or in a mobile setup, the ATH-E50 isolation lets you keep monitor levels lower while the single BA aims for the same balance from venue to venue. In a studio, plug into an interface with the 6.3 mm adapter. For a commute it works too, but there is no mic for calls and no wireless option.

Before buying the ATH-E50

Questions the ATH-E50 listing leaves open.

Check before you buy

  • ATH-E50: impedance and sensitivity not listed
  • ATH-E50: cable connector type not named
  • ATH-E50: no mic or Bluetooth
  • ATH-E50: single BA, not a multi-driver IEM

The product at a glance

Audio-Technica Balanced Armature Studio Earbuds

Best for: Studio monitoring

Form Factor
In-Ear
Recommended Use
Studio
Color
Black
Dimensions
3.43 × 3.9 × 5.39 inches
Weight
0.35 ounces

View on Amazon: Audio-Technica Balanced Armature Studio Earbuds Affiliate link

Audio-Technica ATH-E50: a single balanced armature studio IEM with high isolation, a detachable 1.6 m over-ear cable, four tip sizes and a case.

Pros

  • ATH-E50: accurate single BA tuning
  • ATH-E50: replaceable cable
  • ATH-E50: strong passive isolation

Cons

  • ATH-E50: impedance not listed
  • ATH-E50: no mic for calls
  • ATH-E50: connector type not named

Good fit if

  • You need a reference IEM
  • You perform or produce on the road

Skip if

  • You want heavy bass
  • You want wireless

Verdict: ATH-E50: a pro studio IEM for accurate monitoring.

Specifications side by side

Spec Audio-Technica Balanced Armature Studio Earbuds
Form Factor In-Ear
Recommended Use Studio
Color Black
Dimensions 3.43 × 3.9 × 5.39 inches
Weight 0.35 ounces
Size Adjustable
Model ATH-E50

Frequently asked questions

What driver does the Audio-Technica ATH-E50 use?

A single balanced armature driver in each earpiece.

Does the ATH-E50 have a detachable cable?

Yes, a detachable 1.6 m (5.2 ft) over-ear memory cable.

Is the Audio-Technica ATH-E50 noise cancelling?

No ANC. The ATH-E50 housings are designed for maximum passive isolation.

What comes in the ATH-E50 box?

A carrying case, a 6.3 mm adapter and silicone tips in XS, S, M and L.

What is the ATH-E50 impedance?

The listing does not say; check Audio-Technica's spec sheet.

See also